Hi ,DelIf you are using the Phantom 3 Pro/Adv , please connect your device to the RC with a compatible cable . The RC should be on and you can get access to the camera by then , after that link the RC with the aircraft in the DJI Go . If playback doesn't begin shortly, try restarting your device. ︎DJI Phantom 3 & Accessories - Hi everyone, this worked for me: 1) Connect your drone to your PC first, then launch DJI Assistant 2. 2) DJI Assistant recognized the drone, click on the icon. 3) Unplug drone. 4) Power on remote controller and connect to drone. 5) Connect remote controller to PC. 6) Launch DJI Assistant 2.
As you might have already noticed, not all DJI drone models work with the same app. So, here’s a quick rundown: The Phantom 4 works with the DJI Go 4 app. The Phantom 3 and Matrice series are compatible with the DJI Go app. The DJI Mini 2 and Air 2 are controlled via the DJI Fly app.
Oct 3, 2017. #9. there is a YouTube video on how to take the casing off the old motor and put it on the windings part of the new motor. When a drone lands hard on the camera, it pushes the sensors in the yaw motor up against the edge of the casing. This destroys the sensor.
Since my posting I actually located a vendor with parts compatible to the DJI Phantom 3 series. I have since disassembled my drone and repaired it. The drone now works as it did when it was brand new with all areas of operation in perfect working condition. DJI Customer service on the phone was pathetic and the so called "Assessment" was never
Hello, my name is Brian from Indonesia. I have DJI Phantom 2 Vision Plus, I bought it a month ago. Perfect product and amazing quality, I already took 5-6 flight. And finally decide it to upgrade the latest firmware 3.08. Upgrade was breeze easy, I perform the previous upgrade easily as well. But after I update it to 3.08, the gimbal doesn't work, there is no zen imu/gimbal status on software Hello. After not using my DJI Phantom 3 Professional during winter I have updated firmware to latest (v. 1.8.80) on both devices - RC, aircraft. DJI Pilot version for Android is also the latest - 2.8.1. And now entering to camera view I see only black screen. But camera is recording the pictures and video - problem is only that I don't see it on my phone. How I tried to solve: - rebooting RC

Hi Everyone, I have a Phantom 3 Standard. I purchased this second hand, the drone flies connects to my phone, but I have the following issues. 1. There is no view on the camera when I enter the DJI go app 2. The gimbal/camera says "no SD card" when attempting to update to the newest firmware. 3. Because this is a standard version, I cannot do a firmware update from the SD card. So I sit with a

Many people try to adjust the gimbal of the DJI phantom 4 and have got a solution for various camera problems. If you change the roll setting of the gimbal, you may find out the solution of the camera problem. You have first to do the landing of the flight and then make the necessary adjustment by utilising the gimbal roll.

Images are saved with 20 megapixels. By comparison, the Phantom 4 Standard and the Mavic Pro both only have a 1/2.3 “sensor with 12.4 megapixels. New in the Phantom range is an adjustable aperture from f / 2.8 to f / 11 in the Advanced and Pro, allowing you to enjoy more creative travel.
.
  • qshsv011v5.pages.dev/436
  • qshsv011v5.pages.dev/78
  • qshsv011v5.pages.dev/391
  • qshsv011v5.pages.dev/477
  • qshsv011v5.pages.dev/321
  • qshsv011v5.pages.dev/221
  • qshsv011v5.pages.dev/48
  • qshsv011v5.pages.dev/278

    • dji phantom camera not working